By Emergency Braking, I’m not talking about Tesla’s built in Collision Avoidance. This Emergency Brake can be used when parking on a hill or other steep incline - OR - if you are driving and your brake pedal is failing.
Parking on a Hill
Like all cars, when parking on a hill it is advised to turn your steering wheel so if your car was to accidentally roll, it would roll away from traffic and not into traffic. It is also advised to enable your Emergency Brake. When you put your car in Park, it stops the rear wheels from turning. That may not be good enough on snow and ice or an incline. When you push on the end of the PRND stock, you put your car in Park. If you push and hold, it will also engage the Emergency Brakes making it even harder for your car to roll. When the Emergency Brakes are applied the ((P)) icon will be displayed. When ready to drive, just do as normal and put car in “R” or “D”.
Driving and car not slowing or stopping
Push on the Park button while car is moving, and brakes will be applied. Like going down a hill too fast. An Emergency.
Hear are two YouTube videos that will help explain.
How to use the e-brake when parking:
How to use the e-brake while driving:
Subscribe
Subscribe to our newsletter to stay up to date on the latest Tesla news, upcoming features and software updates.
According to an updated ruling from Transport Canada – the Canadian equivalent of the NHTSA – Tesla will have to recall its recent recall for Canadian cars, which was previously mandated by NHTSA in the United States.
Recalling the Recall
Previously, the National Highway Traffic Administration (NHTSA) required that Tesla recall its icons that indicate that the Brake is in use, the vehicle is in Park, or that the ABS is in use.
Previously, these were all indicated by icons – but NHTSA mandated they be replaced with larger text that is easier to read.
Canadian Regulation
Transport Canada never issued a similar recall – even with the two administrations sharing many rules and regulations to ensure that North America remains a single, easy region to build vehicles for.
Instead, Transport Canada requires that text in vehicles be appropriate for the user language, and that icons are more easily accessible and understood than text. In this case, Tesla has clearly opted for its icons to take the place of text, and has already reverted the update on Canadian vehicles.
Transport Canada did issue a formal OTA update on May 31 to ensure that the change is propagated to all Canadian vehicles – calling for an email notice, and not a mailed letter.
You can see the updated UI indicators for both Canada and the US in your vehicle’s owner manual.
Tesla ships a very detailed and comprehensive diagnostic and repair utility that is available in-vehicle, without requiring external plugs, adapters, or computers. It helps both Tesla and 3rd party technicians service Tesla vehicles far more efficiently.
Who Can Access It?
Unlike many other vehicle manufacturers, who require OBD-2 ports, service subscriptions, and other external utilities, anyone can access Tesla’s service mode. All owners and 3rd party technicians can access Service Mode by simply entering a special mode in the vehicle.
What Features Does It Have?
Service Mode is a special hidden app in the vehicle that provides various diagnostics tools that let you test various vehicle subsystems and components. Remember that if you’re exploring service mode on your own, you’ll want to be careful. Many of the features kept inside Service Mode are intended for debugging or repair – and not for the average user, however, Tesla provides a very user-friendly interface.
The options available will vary based on the vehicle and the systems available in that vehicle. For example, the Model S will have a diagnostic tool to troubleshoot its door handles, while the Model X will have one for its falcon-wing doors, but most tools will apply to a wide range of vehicles.
The Vehicle Info section of Service Mode
Not a Tesla App
How to Access Service Mode
Tesla’s Service Mode is accessible via the touchscreen with just a few taps. Go to the vehicle controls button (the car icon), and tap the Software tab. After that, locate the vehicle model badge, (e.g. MODEL Y Long Range), directly beneath the vehicle image.
Tap and hold the word “MODEL” for 2 seconds, until you see a small ripple then let go. A menu and on-screen keyboard will pop up, prompting for an access code. Type the access code “service”.
Once you do this, it will bring up the SERVICE menu and a new app in the dock that’s red with a wrench. The entire display will also have a red border around it, indicating the vehicle is in Service Mode. Do NOT drive the vehicle in Service Mode, as many safety features are disabled while Service Mode is active.
How to Exit Service Mode
Once again, you can disable Service Mode from the primary display. If you’ve gone into another app, locate a bright red icon with a wrench in the dock or in the All Apps menu.
Once you bring up the Service Mode app, tap on the last icon in the left column. It’s red and shows a door with an arrow. Simply tap and hold this icon for several seconds to exit Service Mode. You’ll know once Service Mode is exited because the red border around the screen will be removed.
If you can’t find the Service Mode app, start Service Mode again by going to Controls > Software and holding the badge icon to enter Service Mode mode again. Once you’re back in the menu, tap and hold on the red exit icon.
Vehicle Info
Tesla breaks Service Mode into various sections which we’ll go through below. The Vehicle Info section provides most of the same information available in the vehicle’s Software menu, showing you things such as VIN, Autopilot computer, software version and more. At the bottom, you also have access to Service Alerts, Service Settings, Software Reinstall, and a Touch Screen check to confirm your display is working correctly. There is also a button for Additional Resources, which takes you to your vehicle’s Service Guide online.
Driver Assist
This tab has two menus – Cameras and ECU. The Cameras menu provides nominal information on the vehicle cameras, including pitch information – useful for technicians working on the windshield. You can also clear camera calibration from here – but you can also do that within the regular vehicle menus and get a full preview of all cameras.
The ECU tab provides information on the vehicle's electronic control unit and GPS/GNSS.
Infotainment
Infotainment section of Service Mode
Not a Tesla App
The Infotainment tab has two menus – Connectivity and Software. The Connectivity menu provides information on Wi-Fi and Cell connectivity and the status of the vehicle’s modems. You can run tests on either modem from here.
The Software tab provides information on the vehicle’s downloaded software and backup banks. Here, you’ll see that both the infotainment and Autopilot systems have 2 side-by-side banks – one keeps the previous update. Map info is also available here. These will be blank or display “—” while updating.
High Voltage
High Voltage section of Service Mode
Not a Tesla App
The High Voltage section is one of the most useful menus – it provides you with the ability to conduct Battery Health tests. The UI here provides information on the entire high-voltage system, including the battery, inverter, motors, vehicle charger, as well as the contactor and high-voltage pyro fuse.
The second tab in the high voltage menu displays the temperature of the battery and details on connected charging apparatuses.
Low Voltage
The Low Voltage system is all the other electronics in the car, and it provides information on the various low voltage components, including the 16v Lithium-Ion (or 12v Lead-Acid, for older vehicles).
This UI is drastically different in the Cybertruck – where it does not run on 16v, but rather 48v.
The last piece of the Low Voltage UI is Homelink. If you purchase Homelink – an add-on module – Tesla will install it for you. If you choose to install it yourself, you can commission the Homelink module through this menu. In the menu, you can also see how many devices are programmed and how many codes have been transmitted with HomeLink.
Thermal
The Thermal menu displays the status of the HVAC system, as well as the battery’s portion of the loop. It’s one of the coolest-looking menus since its animated.
It provides options for self-tests, as well as several options for the coolant and thermal pumps. This UI is for vehicles with heat pumps – legacy vehicles will have an A/C compressor and resistive heating.
The Chassis menu provides you with steering options – and the ability to view or adjust your steering wheel offsets, look at suspension information on the Model S and X, re-calibrate the steering column, and confirm each of the buttons on the steering wheel and its stalks are working as expected.
It also provides you with some details on the vehicle’s brakes – showing some test and brake bleed options. An option for Brake Burnishing option is also available here.
Closures
The closures menu shows the status of windows, or automatic doors as well as the status of the front and rear defrosters. You can recalibrate each window and confirm it’s working properly. On the Model S it displays information on the automatic door handles, on the Model X it has a test for the gull-wing doors and for the Cybertruck you can test the tonneau cover.
Safety & Restraints
Safety & Restraints section of Service Mode
Not a Tesla App
This menu simply displays the status of airbags, seat restraints, occupancy sensors and the pyro fuses in them, letting you confirm that each item is working properly and doesn’t have any faults.
Service Mode+ and Toolbox3
Of course, Tesla does have their own way of getting even more data than what is provided in Service Mode, through Service Mode+ and Toolbox3 – a subscription-access service similar to other vehicle vendors.
Service Mode+ is an additional set of tools that are internal to Tesla and require a Toolbox3 setup and subscription to access. It provides further information to fleet owners, collision centers, and Tesla technicians to diagnose and repair vehicles, as well as providing the capability to easily enable or disable Service Mode on vehicles remotely.
Toolbox3 is a subscription service that Tesla offers 3rd-party technicians and collision centers for around $3,000 per year or a hefty $500 for 30 days. Toolbox3 is installed on a computer and uses a special vehicle interface cable connected to the vehicle. If you’re a technician looking for details on how to set up or use Toolbox3, Tesla’s Online Service Manuals provide a per-vehicle and per-hardware spec guide on how to set it up.
TeslaFi logs your drives and charging sessions, letting you keep a log of your vehice's activity. We highly recommend checking them out if you use your car for business trips and would like to keep track of reimbursements, if you like to see how much you spend on charging or if you just love statistics. Visit their site and see everything they have to offer!
Tesla Android Project enables you to run Android apps in your Tesla. The platform is Open Source and you can deploy it on your own Raspberry Pi 4. Consider supporting the initiative by donating or purchasing the Compute Module 4 Bundle that delivers the best experience. Get $20 off by using the code: NotATeslaApp
The official Tesla app only notifies you if your car is broken into. By installing Sentry Pro on your phone, you will be notified for all Sentry Mode events. Stay connected and avoid potential surprises by receiving notifications. Stop constantly checking the cameras to ensure safety. Check only when necessary, save battery and get peace of mind. Get a 7 day free trial here!
Stay organized, connected, and stylish with Cyberbackpack — the #1 backpack, luggage & travel accessories for Tesla owners. We highly recommend checking them out if you commute or travel and would like a backpack or luggage that is sleek, secure and durable. View their products page and see everything they have to offer!
![Elon talks about Twitter and job cuts at Bloomberg forum [video]](https://www.notateslaapp.com/images/news/2022/elon-musk-qatar-forum_300w.jpg)
